RSS

Tag Archives: Peavey

Impulse® 12D

Impulse® 12D

The new Impulse® 12D powered enclosure features a true ribbon driver and a 12″ field-replaceable dual voice coil premium neodymium speaker. A Woofer Servo circuit monitors back-EMF and controls cone motion, ensuring the cone’s movement mirrors the driving signal from the power amp, and resulting in very low distortion, high power handling and rock-solid low-frequency attack. The advanced new ribbon driver–an exclusive Peavey design based on the ribbons used in the Peavey Versarray™ line array provides 90° H x 30° V coverage, with sonically transparent reproduction.

Utilizing Peavey’s revolutionary IPR™ power amplifier technology, the Impulse 12D produces 1,200 watts of efficient power while weighing a very lightweight 39 lbs. IPR amplifiers are designed with a lightweight switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available.

The Input section features two input channels and a line output, with a mix of I/O options such as combination XLR-1/4″ jacks, RCA and install-ready Phoenix connections. Input channels 1 and 2 also have mic/line source switches and gain controls. The Auto-Off function automatically shuts off the power when it no longer detects a signal, while the Line Out allows the user to chain multiple units or send the input signal to another source.

The DynaQ™ section offers advanced tone controls such as Bass Enhancer, which is an overall loudness boost; a Music/Speech switch that provides optimized EQ settings for each audio type; and Contour, specially configured for program music. A module bay allows for future expansion including Wireless I/O, Delay/Time Adjustment, Mixer Expander, Ethernet I/O and more.

The Impulse 12D is housed in a durable, injection-molded enclosure that includes a pole mount, three flying points and a tilt-back design to facilitate use as a personal monitor.

Advertisements
 
Leave a comment

Posted by on 25/04/2011 in Speaker

 

Tags: , , , ,

PEAVEY VSX48 CROSSOVER

VSX™ 48

VSX™ 48 Digital Loudspeaker Processor The VSX 48 is a fully progammable 32-bit audio processing and louspeaker management control system. Considerably more powerful than similarly priced units, the VSX 48 provides a versatile and economical alternative for system designers.

Features

VSX™ 48

  • 5 inputs/8 outputs
  • 48 kHz sample rate – 24-bit 256x over-sampled Delta-Sigma AD, DA
  • USB A and B ports for memory storage
  • XLR inputs and outputs
  • +24 dBu inputs and outputs
  • Phantom power +48V
  • Weight Unpacked: 7.50 lb(3.402 kg)
  • Weight Packed: 10.00 lb(4.536 kg)
  • Width Packed: 4″(10.16 cm)
  • Height Packed: 23.62″(59.9948 cm)
  • Depth Packed: 11.75″(29.845 cm)

 
Leave a comment

Posted by on 18/04/2011 in Signal Processing

 

Tags: , , ,

PEAVEY CS4080HZ

Peavey has enhanced its stalwart CS Commercial Series power amplifier design with the new four-channel CS 800×4 and two-channel CS 1400, CS 2000, CS 3000 and CS 4000 models. An additional two-channel amp, the CS 4080 HZ, delivers an astonishing 4080 watts at 8 ohms—making it possibly the most powerful subwoofer amplifier on the market.

Building on the reputation of the world-famous Peavey CS 800, which conquered the high-powered amp market in the 1970s, the CS Series is the global standard bearer for workhorse reliability. Over the years, these amps have benefited from many of Peavey’s most popular audio innovations, including our exclusive DDT™ compression/anti-clipping protection. With its 2RU design and high power ratings, this latest evolution of the CS Series is leaner, louder and lighter than ever.

Peavey gives the pro audio world even more reasons to choose the CS Series, including 14 power devices per channel on the CS 3000, CS 4000 and CS 4080, nearly twice the number found in more expensive competitors. The four-channel CS 800×4 utilizes wire-bonded hybrid technology and can power four monitor mixes from a single unit, while the CS 1400 and CS 2000 contain overbuilt heat sinks for more efficient tunnel cooling. All CS power amps include toroidal power transformers for lighter weight and increased power.

The front panel display includes LED indicators for signal presence and DDT active, as well as individual power LEDs that indicate fault conditions. CS amps also feature circuitry to protect against shorts, improper loads, overdriven turn-on levels, high temperatures, DC and subsonic frequencies that could damage loudspeakers. To ensure cool operating temperatures, we’ve included two dual-speed cooling fans on the CS 1400 and CS 2000; two variable-speed cooling fans on the CS 3000, CS 4000 and CS 4080 HZ; and one variable-speed cooling fan on the CS 800×4. CS amps ship with XLR-1/4″ combination inputs; binding post, Speakon® and IEC mains connector outputs; and our strong five-year warranty.

The new CS Commercial Series power amplifiers are now available from authorized Peavey retailers.

 
Leave a comment

Posted by on 06/08/2010 in Power Amplifier

 

Tags: , , ,

 
%d bloggers like this: