Mackie PPM1012 Powered Mixer

Ultra-light and rack-mountable, the Mackie PPM1012 professional powered desktop mixer features two ridiculously robust power amps for mains and/or monitors (800W + 800W). With 1600 watts of system power, this mixer provides all the raw power that you need.

FEATURES

• Full-featured 12-Channel, 1600W Powered Desktop Mixer with 4-segment LEDs and solo PFL on every channel
• 800W + 800W Mackie designed Class-D, Fast Recovery™ power amplifiers
• 32-bit dual RMFX+™ processor featuring 24 “Gig Ready”, useable reverbs, choruses, and tap delay for live applications

 

JBL VERTEC VT4889ADP-DA

The VT4889ADP Full Size Powered Three-Way Line Array Element is designed to deliver high-quality reinforcement of music and speech in a variety of applications including concert audio, corporate A/V and theatrical presentations of all types for both portable users and performance venue installations.

Featurers :

• JBL DrivePack® DP-3 electronics package with robust high efficiency Class-I power
• Modular bay is fitted with DPDA digital audio input module, featuring BSS OmniDrive HD signal processing. Also accepts basic (non-networked, analog) dbx input module or optional Crown networked input modules.
• World-wide AC line voltages automatically selected for 50 or 60 Hz
• Advanced technology components: Differential Drive®, Neodymium Magnet, Dual Voice Coil, Direct Cooled™ cone transducers for low weight and high output
• Industry’s smallest, lightest, most powerful 1.5″ exit, 3″ diaphragm high frequency compression driver
• Proprietary waveguides couple to create precision HF vertical slot aperture
• Radiation Boundary Integrator® (RBI): Patented technology integrates output of individual bandpass elements
• JBL PlyMax® engineered wood materials provide rigid, yet lightweight enclosure
• Rugged DuraFlex™ exterior finish; weatherized loudspeaker cones
• Patented integrated S.A.F.E.™ suspension system with premium heat-treated alloys
• For use in stand-alone arrays or in combination with other VERTEC system models

Specifications :

• Frequency Range       :       40 Hz – 18 kHz (-10 dB)
• Frequency Response       :       45 Hz – 16 kHz (± 3 dB)
• Power Rating       :       6000W Peak          3000W Continuous
• Maximum Peak Output       :       143 dB SPL, 1m
• Bandpass Nominal Impedance       :       4 ohm LF, 8 ohm MF, 16 ohm HF
• Horizontal Coverage       :       90 degrees nominal 250 Hz – 16 kHz (-6 dB)
• Dimensions (W x H x D)       :       1215 mm x 494 mm x 692 mm
• Weight       :       93.1 kg     (205 lb)

 

JBL VERTEC VT4880ADP-DA

The VT4880ADP Full Size Powered Dual 18″ Arrayable Subwoofer is designed to deliver highquality reinforcement of VLF (Very Low Frequency) musical information for a variety of applications including concert audio, corporate A/V and theatrical presentations of all types for both portable users and performance-venue applications. Ideal companion to VT4889ADP full size powered three-way systems.

Features :

• JBL DrivePack® DP3-electronics package with robust high efficiency Class-I power
• Modular bay is fitted with DPDA digital audio input module, featuring BSS OmniDrive HD signal processing. Also accepts basic (non-networked, analog) dbx input module or optional Crown networked input modules.
• World-wide AC line voltages automatically selected for 50 or 60 Hz
• New 2269G Advanced Technology Components: Differential Drive® Neodymium Magnet, Dual Voice Coil, Direct Cooled™ cone transducers with Ultra-Long Excursion capabilities
• JBL PlyMax® engineered wood materials provide rigid, yet lightweight enclosure
• Rugged DuraFlex™ exterior finish; weatherized loudspeaker cones
• Patented, integrated S.A.F.E. suspension system with premium heat-treated alloys
• For use in stand alone arrays or in combination with other VERTEC system models

Specifications :

• Frequency Range : 25 Hz – 160 Hz (-10 dB)
• Frequency Response : 29 Hz – 120 Hz (± 3 dB)
• Power Rating : 6900W Peak    3500W Continuous
• Maximum Peak Output  :   143 dB SPL, 1m (2π half-space ground-based application)
• Bandpass Nominal Impedance  : 2 x 4 ohm
• Dimensions (W x H x D )  : 1229 mm x 493 mm x 1011 mm (48.4 in x 19.4 in x 39.8 in)
• Weight   :  99.4 kg (219 lb)

 

 

QSC CMX Series

QSC CMX 300V

QSC CMX 500V

QSC CMX 800V

QSC CMX 2000V

 

Specifications :

 

RCF ART 725-A ACTIVE TWO-WAY SPEAKER

Features

• 750 Watt Digipro digital amplifier
• 131 dB max spl
• 90 x 60, Wide dispersion constant directivity horn
• 15″ woofer, high power neodymium 3.5″ voice coil
• 2″ HF driver, titanium dome, neodymium 2.5″ voice coil
• PFC power factor correction

Specifications

• Frequency Response -3 dB: 45 Hz ÷ 20 kHz
• Max SPL: 131 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 60°
• Compression Driver: 2″ neo, 2.5″ v.c.
• Woofer: 15″ neo, 3.5″ v.c.
• Input sensitivity: -2 dBu / +4 dBu
• Crossover frequencies: 1200 Hz
• High frequencies: 250 W
• Low frequencies: 500 W
• Total power: 750 W
• Net Weight: 19.4 / 42.76 kg/lbs

Applications

• Compact live sound reinforcement
• Portable PA
• Frontfill and sidefill
• Houses of worship, auditoriums, retail, clubs, ballrooms, corporate AV, live theatre, theme parks
• High-output drum or keyboard monitor

 

PRX618S-XLF 18 in. Self-Powered Subwoofer System

JBL PRX618S-XLF
18 in. Self-Powered
Subwoofer System

The PRX618S-XLF, extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX618S-XLF performs with extreme efficiency and control.

Features :

• Maximum SPL 133 db peak
• 460mm (18 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer
• 1000 Watt (2 x 500 watt) Class-D, Crown® digital amplifier
• DSP input section with dbx® Type IV™ limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
• Professional XLR line and ¼” Mic/Instrument inputs, with loop through
• Obsidian DuraFlex™ coated plywood construction
• Top panel M20 pole mount socket for sub/satellite configuration
• Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort

 

PRX625 15 in. Two-Way Self-Powered Sound Bass-Reflex

The PRX625 is a self-powered, lightweight two-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth.

Features :

• Maximum SPL Output 135db peak
• 2 x 380 mm (15 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofers
• 37.5mm (1.5 in) annular polymer diaphragm, neodymium compression driver
• 1500 Watt (3 x 500 watt) Class-D, Crown® digital amplifier
• DSP input section with dbx® Type IV™ limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ
• Professional XLR line and ¼” Mic/Instrument inputs, with loop through
• Obsidian DuraFlex™ coated plywood construction
• Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort
• 8 M10 Suspension points and 1 pullback point

 

JBL PRX635 15 in. Three-Way Self-Powered Sound Reinforcement System

The PRX635 is a self-powered, lightweight three-way loudspeaker system capable of delivering a very high level of performance over a broad bandwidth.

Features :

• Maximum SPL 135 db peak
• 380 mm (15 in) Differential Drive® dual voice-coil and magnetic gap, neodymium woofer
• 165mm (6.5 in) horn loaded midrange transducer
• 25.4mm (1 in) polymer diaphragm compression driver
• 1500 Watt (3 x 500 watt) Class-D, Crown® digital amplifier
• DSP input section with dbx® Type IV™ limiter circuit, crossover, dynamic limiting, component optimization, selectable system EQ

 

JBL SRX725 Dual 15 in. High-Power Two-Way Loudspeaker

SRX725

Dual 15 in. High-Power
Two-Way Loudspeaker

Features :

• Light-weight and very high-power.
• Dual 380 mm (15 in.) Differential Drive® low-frequency drivers for extended low-frequency output.
• 102 mm (4 in) voice-coil neodymium compression driver for high-power capacity and very lightweight.
• 75°x 50° coverage.
• Bi-amplified or full-range passive operation.
• On SRX725F model, five suspension points may be used with optional M10 eyebolts or detachable track fittings.

Specifications :

• Power Rating : 1200 W / 2400 W / 4800 W
• Frequency Range : 37 Hz – 20kHz (-10 dB)
• Dimensions (H x W x D) : 1219 mm x 541 mm x 508 mm (48 in x 21.3 in x 20 in)
• Frequency Response : 53 Hz – 20 kHz (±3 dB)
• Coverage Pattern : 75º x 50º nominal
• Net Weight : 45 kg (100 lb.)

 

 

JBL SRX722 Dual 12 in. High-Power Two-Way Loudspeaker

 

Features :

• Light-weight, compact and very high-power.
• Dual 305 mm (12 in) Differential Drive® low-frequency drivers for very high acoustic output.
• 102 mm (4 in) voice-coil neodymium compression driver for high-power capacity and very light-weight.
• 75°x 50° coverage.
• Bi-amplified or full-range passive operation.
• Flying version available (SRX722F) with five suspension points may be used with optional M10 eyebolts or detachable track fittings.

Specifications :

• Power Rating  :       1200 W / 2400 W / 4800 W
• Frequency Range :       72 Hz – 20 kHz (-10 dB)
• Dimensions (H x W x D) :       965 mm x 394 mm x 394 mm (38 in x 15.5 in x 15.5in)
• Frequency Response :       81 Hz – 20 kHz (±3 dB)
• Coverage Pattern   :       75º x 50º nominal
• Net Weight   :       34 kg (76 lb.)